Flashing and detail conditions were a challenge, such as one of several curved masonry walls seen here. Galbraith Pre-Design, Inc field fabricated most trims and flashings on this project.
Posts Categorized: Roofing Repair
Galbraith Pre-Design, Inc was recently contracted to supply/install a standing seam metal roof over a leaky flat rubber roof. This is done by installing steel subframing in order to add slope to the roof, then installing the standing seam panels on the new structure.
A metal retofit sytem such as Read More
This is not an issue with the Armco roof installed 30yrs ago by us, but with the original metal pipe flashing having reached the end of its life several years go. Notice how the roof is as good as the day it was installed!
Here, we used a roof Read More
Wood framing is completed, and ready for electrical, plumbing, mechanical, and fire suppression rough-in. Roof structure consists of TJI’s bearing on 2×6 SPF exterior walls, which allows for a clear-span of 27ft with no bearing walls on the interior.
Masons have begun laying the exterior brick veneer, to match the Read More
Progress continues at our 2nd Pres. Church renovation project. Here, an existing glass skylight roof system was removed, re-framed, and replaced with a standing seam metal roof system. Also, eight (8) window openings were cut into the existing brick/block wall, and prepped with brick and pre-cast concrete to accept new Read More
Prior to starting the project, we took field measurements, generated shop drawings, and custom fabricated all necessary parts from 24ga painted steel flat sheet Read More
The above photos show damage to a structural roof member. It was caused by an unauthorized point load being placed on the beam – in this case, a chain hoist was attached to erect a piece of equipment.
The entire beam was replaced by Galbraith Pre-Design, Inc. This consisted teporarily Read More